Control Systems & Panels

Electricity is a source of heat and a frequent cause of fires; some contributing factors are the misuse of electrical equipment and poor maintenance. With the increasing number of electrical appliances we use, consideration of the need for additional sockets or upgrading of electrical circuits may be necessary.

Temperature Indicatorsare installation instruments which can process signals fromtemperature sensorsand show them on thedisplay.Temperature indicators enable easy and economic valuation of resistance sensors, such asPt100or different thermo element types. These sensors can be directly connected to temperature indicators to avoid the installation of atransducer. Some temperature indicators can only be used with sensors.

Compensated Cable is a type of thermocouple cable that uses a different composition to extension cable (true thermocouple cable) that is only used to extend a thermocouple signal from the thermocouple sensor back to instrumentation.Compensating cable is made from cheaper alloys than extension cable. Where extension cables contain thermocouple elements, and can be used to manufacture thermocouples, compensating cables contain alloys that only have a similar temperature vs EMF relationship to its extension cable counterpart over a limited range.

Anautomatic weather station(AWS) is an automated version of the traditionalweather station, either to save human labour or to enable measurements from remote areas.An AWS will typically consist of a weather-proof enclosure containing thedata logger,rechargeable battery,telemetry(optional) and the meteorological sensors with an attachedsolar panelorwind turbineand mounted upon a mast.

A Sensoris a device,machine, or subsystem whose purpose is to detect events or changes in its environment and send the information to other electronics.A sensor is always used with other electronics.Applications include manufacturing and machinery, airplanes and aerospace, cars, medicine, robotics and many other aspects of our day-to-day life. There are a wide range of other sensors, measuring chemical & physical properties of materials.
Transmitters are used in many industries to measure and control variables. There is a wide range of transmitters depending on their construction, working, and applications. Apressure transmitteris one such type of an electronic transmitter, which converts the pressure into a proportional electrical signal.

We are a reputed firm engaged in manufacturing high quality Alarm & Gas Detectors. Specially manufactured with the most advanced technologies using high grade raw materials, these products are highly appreciated for compact design, high durability and excellent performance.

Flow meter is very eazy to measures Flow rating and Total Flow or Batch flow, Digital Flow meter is more accuracy than Analog flow system. Usages of liquids like water, ultrapure water, STP water, ETP Water, WTP water, Chemicals Alkalic to Acidic, GAS, Diesel, Thermal oil, oil, Steam....
we offering
Peddle wheel type flow meter, Electromagnetic flow meter, Thermal mass flow meter, Vortex flow meter, Ovel Gear PD type diesel flow meters, Air flow meters, Steam Flow meter, Ultrasonic flow meters.......

A wide range of Thermocouples is offered by us in compliance with required standards & classes. Also we are manufacturing RTD, PT100, PT1000, which are available with custom made mounts and sizes.

Data loggers are electronic devices which automatically monitor and record environmental parameters over time, allowing conditions to be measured, documented, analysed and validated. The data logger contains a sensor to receive the information and a computer chip to store it. Then the information stored in the data logger is transferred to a computer for analysis.

We are engaged in manufacturing & supplying of Transmitters that provide reliable and precise results combined with durability. Depending on the application in a room or in a duct, the corresponding designs can be selected. 

Our clients can avail from us a quality range of Indicators that is assembled using magnetic float and can be used which can be used in hazardous fluids. These indicators are meant for the precise functioning and hassle free operation.

We are engaged in offering a range of Thermometers which is used for the purpose of measurement and monitoring tasks in various industries. Exhibiting attributes like strength, accurate readings, excellent performance and durable nature, these products are widely demanded in the marketplace.

A flow meter works by measuring the amount of a liquid, gas, or steam flowing through or around the flow meter sensors. Flow meter sensors work in different ways, but with the same end goal: Provide the most accurate and repeatable flow measurements for a specific application, whether for process control, general research activities, or semiconductor processing.

Digital panel meters are digital displays intended to be mounted in a panel, such as a control panel. They typically read some type of input, be it a voltage, current, or resistance, and display its value digitally. Often this input is a measurement from a sensor which is converted and displayed as a temperature, pressure, or other system variable. These meters may also act as simple controllers which trip a switch or perform a simple function when the reading reaches a preset measurement.

Water quality monitoring is defined here as the sampling and analysis of water constituents and conditions. These may include:

• Constituents found naturally in water that can nevertheless be affected by human sources, such as dissolved oxygen, bacteria, and nutrients.
• The magnitude of their effects can be influenced by properties such as pH and temperature. For example, temperature influences the quantity of dissolved oxygen that water is able to contain, and pH affects the toxicity of ammonia.
• Introduced pollutants, such as pesticides, metals, and oil.

An Electrical Enclosure is a housing for electrical or electronic equipment.Its purpose is to protect that equipment from the environment (especially in the case of external electrical enclosures) and also to protect people from the equipment (e.g.to prevent electric shock or the propagation of an explosion).The enclosure needs to be reasonably watertight to protect from precipitation.Condensation is also a common problem which can be harder to eradicate since it involves the ingress of water as a vapour.

We specialize in manufacturing a wide range of high precision level Sensors that vary from simple, single point, low cost level to specialized & complex level. Our sensors have the monitoring solutions for conducting and conditioning liquids, granules, powders and heavy solids.

We have acquired specialization in offering special purpose Meters as per customer’s specifications. These are offered only to OEMs and are appreciated for their innovative design and clear 12 digit display. Highly cost-effective, these have a high speed operation.

“Air quality” refers to the condition of theairwithin our surrounding. Goodair qualitypertains to the degree which theairis clean, clear and free from pollutants such as smoke, dust and smog among other gaseous impurities in theair.Air qualityis determined by assessing a variety ofpollutionindicators.

Theluxis theSI derived unitofilluminance, measuringluminous fluxper unit area.It is equal to onelumenper square metre. Inphotometry, this is used as a measure of the intensity, as perceived by the human eye, oflightthat hits or passes through a surface. It is analogous to theradiometricunitwatt per square metre, but with the power at eachwavelengthweighted according to theluminosity function, a standardized model ofhumanvisual brightness perception.

Product quality, safety, process optimization and environmental protection – these are only a few reasons why industrial flow measurement is becoming more important all the time. Water, natural gas, steam, mineral oil, chemicals are some of the fluids that have to be measured day in, day out. There is no single, across-the-board technology suitable for all these applications, so you can choose the flowmeter best suited to your process.

Water testing can range from in-field testing of a single analyte to multiple-component instrumental analysis in the laboratory.Handheld and benchtop equipment such as electronic meters are available to test parameters including pH, turbidity (the amount of particulate suspended in a liquid), and electrical conductivity.Water quality testing equipment can be found in almost any laboratory environment, including wastewater and drinking water testing, pharmaceutical and chemical testing, the food and beverage industry, and hydroponics.

We are among the celebrated names in the industry for manufacturing and supplyingWater Treatment Plants. The offered plants are exceptional in terms of performance and are used for purifying drinking water for elimination of impurities and ions. These systems ensure the hygienic parameters and are extensively regarded by our clients. The offered systems are ideal for offices and educational institutions.

A Transduceris a device thatconvertsenergy from one form to another. Usually a transducer converts asignalin one form of energy to a signal in another.Transducers are often employed at the boundaries ofautomation,measurement, andcontrol systems, where electrical signals are converted to and from other physical quantities (energy, force, torque, light, motion, position, etc.). The process of converting oneform of energyto another is known as transduction.

Analytical Balances are highly sensitive lab instruments designed to accurately measure mass. Their readability has a range between 0.1mg - 0.01mg. Analytical balances have a draft shield or weighing chamber to prevent the very small samples from being affected by air currents.
A Weighing Balances is an instrument which is used to determine the weight or mass of an object. Available in a wide range of sizes with multiple weighing capacities they are essential tools in laboratories, commercial kitchens and pharmacies to name but a few.

For environmental technicians, industrial hygienists and other air quality professionals, the ability to go anywhere and collect samples easily is essential. Fortunately, technology is evolving, and today's portable air sampling instruments are smaller, lighter and more accurate than ever before.

The Vibration Meter is a versatile hand-arm vibration meter. The main feature of the vibration meter is the human vibration exposure assessment.The vibration meter is used as a hand-held measuring device for the individual assessment of vibrations on machines and systems. With the help of this vibration meter, the actual state can easily be determined on site. ThisVibration Meter is battery powered and easy to use. This Vibration Meter can be used for detecting noise in machine components, such as gears, valves, vents, and pumps.

A Sound Level Meteris used foracoustic (sound that travels through air) measurements. It is commonly a hand-held instrument with amicrophone. The best type of microphone for sound level meters is the condenser microphone,which combines precision with stability and reliability. The diaphragm of the microphone responds to changes in air pressure caused by sound waves.A microphone is distinguishable by the voltage value produced when a known, constantsound pressureis applied. This is known as the microphone sensitivity. The instrument needs to know the sensitivity of the particular microphone being used. Using this information, the instrument is able to accurately convert the electrical signal back to a sound pressure.

Atachometer(revolution-counter,tach,rev-counter,RPM gauge) is an instrument measuring the rotation speed of ashaftor disk, as in a motor or other machine.The device usually displays therevolutions per minute(RPM) on a calibrated analogue dial, but digital displays are increasingly common.

It allows for the easy measurement of different spot sizes due to the variety of interchangeable lenses.InstrumentSystemsdisplaymeasurement products are extremely responsive and produce highly precise results.Indoor LED display screens also provide seamless displays that are ideal for ambient lighting and shorter viewing distances.Outdoor LED screens are mostly used at venues where a mega show is on—for brand advertisements, for instance, as they can offer full colour and very high brightness. Indoor LED screens, on the other hand, cannot address the needs of mega outdoor display projects but are ideal for indoor applications.

Prominent & Leading Manufacturer from Chennai, we offer ir temperature sensor , -20 to 500 deg c, pt100 rtd temperature sensor, pt100 rtd sensor and pt1000 rtd sensor.

A Heateris a piece of equipment or a machine which is used to raise the temperature of something. It is a device that uses electricity to produce heat, for example from metal bars that become red and hot when the current is switched on.

Process Control is the active changing of the process based on the results of process monitoring. Once the process monitoring tools have detected an out-of-control situation, the person responsible for the process makes a change to bring the process back into control.Process metersare high precision instruments designed to measure, display, alarm, and control a wide range ofprocessvariables, such as 4-20 mA and 0-10 V analog inputs.
Digital Indicators and Controllersmanufactured by usinclude panel mounting indicators, process controllers, Differential Pressure Indicators, Digital Temperature Indicators, Temperature Controllers, Jumbo Sized Display Indicators. The Universal Input Indicators can accept selectable inputs of RTD Pt-100, All Thermocouples, Analog 4-20mA, Voltage 0-1V.D.C. or 0-10V.D.C. Available in panel mounting sizes of 96 x 96, 48x48, 96 x 48 mm.

Prominent & Leading Manufacturer from Chennai, we offer pt1000 rtd temperature sensor, r type thermocouple sensor and t type thermocouple sensor.

A Variable-Frequency Drive(VFD)is a type ofmotor driveused inelectro-mechanicaldrive systems to controlAC motorspeedandtorqueby varying motor inputfrequencyandvoltage.VFDs are used in applications ranging from small appliances to large compressors.Systems using VFDs can be more efficient than those using throttling control of fluid flow, such as in systems with pumps and damper control for fans.VFD cost and size and has improved performance through advances in semiconductor switching devices, drive topologies, simulation and control techniques, and control hardware and software.

Our product range includes a wide range of magnehelic differential pressure gauge.

mepcco absolute pressure sensors, mepcco 85cv absolute pressure sensor, soil moisture sensor, mepcco sb-100 barometric pressure sensor and mepcco differential pressure sensors